Where ?

[downhilldude]

Hi where is the best place to buy kona bushing's/ bearing's I can't seem to fina any on crc. Any advice it is just for the rear pivot bushing linkage. Thanks again lads. Jonathan

[thetrailbuilder]

any kona dealer

[Farry]

phone up and ask.they can always order them in

[chucky]

Unless your planning to fix it yourself, i think you'd be best leaving it into whoever is going to fix it.

Let them worry about getting the spare parts etc.

(that is unless they've told you to source them yourself).

[downhilldude]

yea cycle zone is replaceing the rear break hose and and headset. but he said bushings he can't get the prarts. so i said i will get them i will ask him if he will fit them..does real cycles do kona bushings like i only need 1 or do you have to buy a whole kit. and if i don't replace it will it just snap the pivot.

[the goat]

bearings? there is a bearing shop across the road from bikedock, they are usually standard rs deep groove ball bearings, all you need is the codes off the black seals on the old ones, but seriously id get someone else to do the actual swap for you cus theres a lot you can **** up when you are changing bearings if you dont know what you're at.

if its shock hardware then betd is the place if all else fails, shock eyelet bushings are a pretty standard part also.

i get that you are not really sure what it is you need here, so best thing to do is take the bike to a shop with a decent workshop and let them sort it for you.

[downhilldude]

Did you see the picture's it is only the rear arm bushing..Thanks

[the goat]

aye jus seen the pic there in another post, betd (in wales?) do rear ends for konas so id guess that would be a good place to start, they always tend to make a few improvements over stock components too wherever possible ;)

[downhilldude]

Weird i fixed it myself took it out and put it back in and no movement at all. happy day's for now. Thanks for the help